HUNTSMAN

Pultrusion Polyol Blend – RIMLINE SK 97018 is a fully formulated, low viscosity polyol blend including internal mold release (IMR) intended for use in pultrusion processing. Designed as part of a two-component system in conjunction with SUPRASEC 9700 MDI-based isocyanate, the resin offers excellent wetting characteristics, accelerated line speeds, low pull forces, and no VOC emissions. The complete polyol/isocyanate resin system is ideally suited for structural profiles in demanding applications where superior strength and durability are required.

Modified Aromatic Polyester Polyol – TEROL 11 is recommended for use in polyurethane (PUR) systems, especially those with higher water content for water blown applications. It has a very low OH number for ease of formulating and low viscosity.

Modified Aromatic Polyester Polyol – TEROL 1154 was developed for the polyisocyanurate (PIR) continuous lamination market. The low hydroxyl number allows for reduction in the use of polymeric isocyanate without loss of foam physicals. Properly formulated boards made with TEROL 1154 can pass all UL and FM requirements.

Modified Aromatic Polyester Polyol

Modified Aromatic Polyester Polyol – TEROL 1326 is a high functionality polyester polyol recommended for use in pour-in-place (PIP) and panel systems, both continuous and discontinuous, particularly those using hydrocarbon blowing agents. TEROL1326 will give short demold times and improved efficiency due to its high compatibility with hydrocarbons.