PARKER LORD

Lord 406 acrylic adhesive bonds a wide variety of prepared or unprepared metals and engineered plastics. Lord 406 adhesive is specifically formulated to provide the highest impact and peel strengths available in a room temperature curing adhesive. Lord 406 adhesive replaces welding, brazing, riveting, and other mechanical fastening methods especially in low temperature environments subject to high impact or high peel loads.

LORD 606 adhesive when mixed with LORD Accelerator 6 or 6GB creates a fast-setting adhesive that will bond composites including DCPD (dicyclopentadiene) resin and modified DCPD resin based FRP (fiber reinforced plastic). This mixed adhesive can also cross-bond composites to many metals. LORD 606 adhesive in combination with LORD Accelerator 6 or 6GB utilize a unique patented technology to create exceptionally strong bonds with excellent surface cure and minimal surface preparation. LORD 606 adhesive can be mixed with either LORD Accelerator 6 or LORD Accelerator 6GB. LORD Accelerator 6GB allows precise control of the adhesive bondline thickness due to its content of glass beads. For further detailed information on LORD Accelerator 6 and LORD Accelerator 6GB, refer to the applicable data sheet.

LORD 661, 662, and 663 acrylic adhesives when mixed with LORD Accelerator 6 create adhesive systems that will bond composites including DCPD (dicyclopentadiene) resin and modified DCPD resin based FRP (fiber reinforced plastic). These adhesive systems can also cross-bond composites to many metals. LORD 661, 662, and 663 acrylic adhesives in combination with LORD Accelerator 6 utilize unique patented technology to create exceptionally strong bonds with excellent surface cure and minimal surface preparation. LORD 661, 662, and 663 acrylic adhesives are available in a range of working times to accommodate a wide variety of process requirements. For further detailed information on LORD Accelerator 6, refer to the LORD Accelerator 6 data sheet.

LORD 7100 and 7150 adhesives are two-part, high strength urethane adhesives used to bond cloth, paper, plastics, foams, rubber, painted metals, and powder coated metals. LORD 7100A and 7150A resins are composed of isocyanate. LORD 7100B and 7150B curatives are composed of polyol. These adhesives can be either room temperature cured or heat cured for faster processing. LORD 7100 adhesive cures to a glossy black appearance; LORD 7150 adhesive cures to a unique gray color.

LORD 7421 adhesive is a single-component, moisture-cure urethane adhesive offering quality adhesion performance and non-conductive properties. It successfully bonds Hytrel, chlorinated polyethylene (CPE), thermoplastic polyurethane (TPU), Nylon 11 and other thermoplastics to fiber reinforcements, such as polyester and Kevlar, during construction of high-pressure hose. LORD 7421 adhesive adheres reinforcement yarns to the extruded core, as well as adhering the extruded jacket to the reinforcement yarns. This single-component adhesive provides good hydrolytic stability and has an increased pot life.