PARKER LORD

LORD Chemlok 5151 adhesive is a one-coat adhesive used to bond uncured fluoroelastomers to metal. It can also be used to bond fluoroelastomers to phosphatized metals.

LORD Chemlok 6016 adhesive can be applied as a one- or two-coat system to bond a variety of vulcanized and unvulcanized rubber compounds to metal. It is formulated without heavy metals. A single coat of Chemlok 6016 adhesive will bond compounds based on natural rubber (NR), polyisoprene (IR), styrene-butadiene (SBR), polybutadiene (BR), polychloroprene (CR), nitrile (NBR), butyl (IIR) and EPDM polymers to metals. These metals include carbon and alloy steels, stainless steel, aluminum, magnesium, zinc, copper and copper alloys. For maximum protection or when environmental conditions are severe, Chemlok 6016 adhesive can be used over Chemlok 205 or 207 primer.

LORD Chemlok 607 adhesive is a clear, one-coat adhesive used to bond unvulcanized silicone rubber to various substrates such as metals, glass, plastics and textiles. Chemlok 607 adhesive also bonds specialty elastomers such as fluoroelastomers, polyacrylates, epichlorohydrin and some peroxide vulcanized elastomers.

LORD Chemlok 608 adhesive is a one-coat adhesive designed for bonding unvulcanized silicone elastomers to various rigid substrates. Chemlok 608 adhesive also provides excellent adhesion to a wide variety of commercially available silicone compounds which require a post cure.

LORD Chemlok 610 adhesive is a one-coat, aqueous adhesive used to bond fluoroelastomers, polyacrylates, ethylene acrylic and peroxide vulcanizing EPDM elastomers to metals and textiles. It can also be used as a coating to protect metals against corrosion.