PARKER LORD

LORD Chemlok 8116 adhesive is a one-coat, aqueous adhesive used for vulcanization/bonding of peroxide cure elastomers, such as silicone rubber, EPDM, FKM, HNBR and NBR, to zinc phosphatized steel and other rigid substrates. With good resistance to hot oils, hot water, and other engine fluids, Chemlok 8116 adhesive is suitable for use in the manufacture of gaskets, seals, and NVH components.

Chemlok 8116-1 adhesive is a one-coat, water-based adhesive used for vulcanization/bonding of peroxide-cured elastomers to zinc phosphatized steel and other rigid substrates. With good resistance to hot oils, hot water, and other engine fluids, Chemlok 8116-1 adhesive is suitable for use in the manufacture of gaskets, seals, and NVH components.

Chemlok 8117 is a single-coat aqueous adhesive used to bond fluoroelastomers, polyacrylates, silicones and other specialty elastomers to various metal substrates.

Chemlok 8200 is an aqueous adhesive that provides excellent adhesion of elastomers to primed metal surfaces. Chemlok 8200 adhesive is recommended for spray application over Chemlok 8006 or Chemlok 8003 aqueous primers.

LORD Chemlok 8210 adhesive is an aqueous covercoat adhesive used to bond a variety of elastomers to primed metal during vulcanization. It is composed of a mixture of dispersed fillers, resins, and latices in aqueous medium. Chemlok 8210 adhesive is recommended for spray and dip application over Chemlok 8007 and Chemlok 8003 aqueous primers. When used over these aqueous primers, this adhesive system will also bond cold rolled steel, phosphatized steel, aluminum, and other various substrates.