PARKER LORD

LORD Chemlok 8560D adhesive is a general purpose, one-coat aqueous adhesive used to bond a wide variety of vulcanized and unvulcanized rubber compounds to metal. A single coat of Chemlok 8560D adhesive will bond compounds based on natural rubber (NR), polyisoprene (IR), styrene-butadiene (SBR), polybutadiene (BR), polychloroprene (CR) and nitrile (NBR) polymers to a variety of metals such as carbon and alloy steels, stainless steel, and aluminum during the vulcanization process. Chemlok 8560D adhesive has been formulated using water as the carrier system and does not contain co-solvents. Chemlok 8560D adhesive is suitable for dip applications and may be diluted for spraying. When environmental conditions are severe, Chemlok 8560D adhesive is recommended to be used over Chemlok 8007 aqueous primer.

LORD Chemlok 8560S adhesive is a general purpose, one-coat aqueous adhesive used to bond a wide variety of vulcanized and unvulcanized rubber compounds to metal. A single coat of Chemlok 8560S adhesive will bond compounds based on natural rubber (NR), polyisoprene (IR), styrene-butadiene (SBR), polybutadiene (BR), polychloroprene (CR) and nitrile (NBR) polymers to a variety of metals such as carbon and alloy steels, stainless steel, and aluminum during the vulcanization process. Chemlok 8560S adhesive has been formulated using water as the carrier system and does not contain co-solvents. When environmental conditions are severe, Chemlok 8560S adhesive is recommended to be used over Chemlok 8007 aqueous primer.

LORD Chemlok 8600 adhesive is a one-coat aqueous adhesive used to bond castable urethane elastomers to metal. Chemlok 8600 adhesive will also bond a wide variety of both polyether- and polyester-based urethanes of varying hardness to all types of metals.

LORD Chemlok 8800 adhesive is a one-coat, aqueous adhesive used for bonding silicone rubber, EPDM, HNBR, XHNBR, AFLAS, VAMAC, and other peroxide-cured materials. With good resistance to hot oils, hot water, and other fluids, Chemlok 8800 adhesive is suitable for use in the manufacture of gaskets, seals, and NVH components.

LORD Chemlok 901 primer is a solvent-based primer specifically developed for use with Chemlok 950 adhesive where performance in severe environments is required. It is composed of a mixture of polymers, organic compounds, and mineral fillers dissolved or dispersed in an organic solvent system.