PARKER LORD

Lord 7411 adhesive is formulated blue for easy identification on light colored extruded tubing as well as on reinforcement yarns. Lord 7411 adhesive is 100% solids; this eliminates the chance of entrapping solvents and blistering the extruded jacket. It also eliminates the need for handling solvent fumes. This single pack adhesive has good hydrolytic stability and an extended work time. It also eliminates the need for mix/meter/dispense equipment. Lord 7411 adhesive at 100% solids or diluted with solvent to 60% TSC is an excellent adhesive for bonding polyester reinforcement to an extruded Hytrel core. At 100% solids, Lord 7411 adhesive offers excellent adhesion between Hytrel or TPU (thermoplastic urethane) and polyester or Kevlar reinforcement. For adhesion between polyester or Kevlar and a nylon 11 core, a solution of Lord 7411 adhesive works best. When bonding Hytrel and polyester reinforcement, peel values down the length of the hose equal 3.5 – 5.3 kN/m (20 – 30 pli).

Lord 7420 is a flexible, polyether-based, moisture-cure urethane adhesive. It has been successful in bonding Hytrel, chlorinated polyethylene (CPE), thermoplastic polyurethane (TPU), Nylon 11 and other thermoplastics to fiber reinforcements such as polyester and Kevlar, during construction of high-pressure hose.

Lord 7713 is a single component, room temperature curing primer which enhances adhesion to a variety of substrates with most adhesives.

Lord AP-134 primer is a clear, low viscosity, solvent borne reactive polymer that functions as a primer or adhesive for various polar substrates. These substrates include: steel, aluminum, brass, E-coated metal, glass fabric, architectural and automotive glass, ceramic tile, vitrified clay pipe, concrete, and some plastics.

Aqualast BL100 Butyl Elastomer Emulsion is used to coat a variety of woven and non-woven fabrics. It offers broad latitude in formulating waterborne coatings for fabric.