MAGRIS TALC

Mistron 201 is high-purity engineered talc which has very low viscosity-build, allowing it to be formulated at higher loadings in low VOC industrial primers. The Mistron 201 particle size distribution provides efficient particle packing with fine extenders and anti-corrosive pigments. Mistron 201 is made from Yellowstone talc which has been proven for over 50 years to give superior corrosion resistance.

Mistron 353 is a high purity microcrystalline talc. Mistron 353 is used in interior and exterior coating, adhesive and sealant formulations to reduce hard settling, improve sag resistance, and maximize prime pigment extension. Mistron 353 is used in solid color and semi-transparent wood stains to prevent tannin bleed and improve gloss uniformity without introducing abrasive characteristics. Mistron 353 acts as a reinforcing agent to enhance compound performance by increasing film strength and flexibility. Mistron 353 has a platy, hydrophobic structure used in architectural and industrial primers to improve barrier properties which impart corrosion resistance and stain blocking ability. Mistron 353 could also be used in plastics as a cost-effective reinforcing agent to improve stiffness, HDT, and dimensional stability. In rubber, it acts as a dusting/parting agent.

Mistron 400C is white, high purity, platy talc, whose brightness, top size, and median particle size have been controlled to produce superior antiblocking and mechanical properties in plastic films along with lower haze and better clarity.

Mistron 403 is high purity, platy, microcrystalline talc. In architectural and industrial primers, it provides barrier properties to improve corrosion resistance and stain-blocking ability. Mistron 403 also prevents tannin-bleed and improves gloss-uniformity in solid-color and semi-transparent stains. In sealant formulations, Mistron 403 enhances film strength and flexibility. Mistron 403 could also be used in plastics as a cost-effective reinforcing agent to improve stiffness, HDT, and dimensional stability. In rubber, it acts as a dusting/parting agent.

Mistron 554 is off-white, high purity, platy, fine talc that is primarily used in architectural and industrial primers, where its platy nature improves barrier properties, corrosion resistance, and stain blocking ability. Mistron 554 also is used in topcoats to reduce hard settling, improve sag resistance, and extend prime pigments. Mistron 554 could also be used in plastics to increase stiffness, HDT, and dimensional stability of plastic compounds, and in rubber to reduce viscosity, improve processing, and act as a parting/dusting agent.