PARKER LORD

LORD CoolTherm EP-636 epoxy encapsulant is a two-component system specifically designed for high temperature applications. CoolTherm EP-636 encapsulant is recommended for encapsulation of electric motor stator assemblies used on downhole oil pumps.

Dibenzoyl-p-Quinone Dioxime (DBQDO) is an effective non-sulfur vulcanizing agent for natural and synthetic elastomers. Butyl rubber cured with DBQDO agent is used for high voltage wire and cable products, molded electrical compounds, heat resistant seals, jackets, and hose, inner tubes, and tire curing bags. DBQDO agent is similar to para-Quinone Dioxime vulcanizing agent (QDO) in the properties it imparts to butyl, but different in its processing characteristics. DBQDO agent is slower, i.e., less scorchy than QDO agent and allows the processor more working time. DBQDO agent is usually preferred when processing convenience is of primary importance. DBQDO agent is often used in conjunction with an activator, e.g., red lead. In non-black stocks, it can be used with MBTS as the oxidizing agent for additional processing safety. DBQDO agent is also available from several companies in elastomer dispersions. For further information on these products, contact your Lord Technical Representative.

LORD HPC-3B and HPC-3C are two-part, room temperature curing fluoroelastomer coatings which feature robust adhesion and exceptional mechanical properties. These coatings greatly enhance fuel and fluid resistance for a wide variety of elastomeric substrates. HPC-3B is black; HPC-3C is clear. Coatings are composed of a mixture of polymers, organic compounds, and fillers dissolved or dispersed in an organic solvent system. HPC-3 Curative is added to either HPC-3B or HPC-3C.

LORD HPC-5B and HPC-5C are one-part, room temperature curing HNBR coatings which feature robust adhesion and exceptional mechanical properties. These coatings greatly enhance fluid and ozone resistance for a wide variety of elastomeric substrates. HPC-5B is black; HPC-5C is clear and colorable. Coatings are composed of a mixture of polymers, organic compounds, and fillers dissolved or dispersed in an organic solvent system.

LORD HPC-6B and HPC-6C are one-part, room temperature curing ethylene acrylic elastomer (AEM) coatings which feature robust adhesion and exceptional mechanical properties. These coatings enhance ozone and fluid resistance on a wide variety of substrates while having very low VOCs. HPC-6B is black; HPC-6C is clear and colorable. Coatings are composed of a mixture of polymers, organic compounds, and fillers dissolved or dispersed in an organic solvent system. Additionally, the HPC-6C coating mixes well with colored pigments allowing for the creation of colored coatings.