PARKER LORD

LORD Chemlok 6954 adhesive is a general purpose adhesive used to bond a variety of rubber compounds to metal. It is composed of a mixture of polymers, organic compounds, and mineral fillers dissolved or dispersed in an organic solvent system. Chemlok 6954 adhesive will bond compounds based on natural rubber (NR), polyisoprene (IR), styrene-butadiene (SBR), polybutadiene (BR) and polychloroprene (CR) polymers to metals. Chemlok 6954 adhesive is recommended for use over Chemlok 297 primer. Chemlok 6954 adhesive can also be used without a primer in some applications.

LORD Chemlok 6956 adhesive is a high performance adhesive used to bond a variety of elastomer compounds to substrates. It is composed of a mixture of polymers, organic compounds, and mineral fillers dissolved or dispersed in an organic solvent system. Chemlok 6956 adhesive will bond compounds based on natural rubber (NR), polyisoprene (IR), styrene-butadiene (SBR), polybutadiene (BR) and polychloroprene (CR) polymers to metals. Chemlok 6956 adhesive is recommended for use over Chemlok 298 primer. Chemlok 6956 adhesive can also be used without a primer in some applications.

Chemlok 701 adhesive is a one-coat urethane adhesive used to bond a wide variety of thermoplastic polyurethane (TPU) and castable urethane elastomers to metal. It is composed of a mixture of polymers, curatives, and pigments dissolved in an organic solvent system. Chemlok 701 adhesive provides bond strengths greater than the tear strength of the urethane substrate. In addition, this product bonds polyester-, polyether- and polycaprolactone-based TPU directly to aluminum or steel in an injection molding process without the need for primers.

Chemlok 7422 adhesive is a single pack, moisture cure urethane adhesive used to bond foam, fabric, wood, thermoplastic, and rubber. Chemlok 7422 adhesive will adhere reinforcement yarns to thermoplastic tubing and to thermoplastic protective hose covering.

Chemlok 7660 is a single-component, moisture-cure urethane adhesive which offers very good initial tack and green strength and increased flexibility over Chemlok 7650 adhesive. Chemlok 7660 adhesive initially works much like a contact adhesive; however, as the moisture extension of the polymer develops, the adhesive becomes permanently cross-linked. Chemlok 7660 adhesive adheres very well to open cell polyethylene foam, styrofoam, urethane foams, plastics, rubber, and prepared metals.